A/V Switch Menu

Misc Product Menu

Support Files

Contact us

What's New

Product Design and Manufacturing

Industry Links

 
The AC-8 is designed for people who need a high quality power controller for small to medium sized home theaters and audio applications. The AC-8 is designed with only the highest quality components to provide long lasting reliability. As you invest more time and money in your audio/video or computer system, it doesn't become more important to protect the equipment from electrical mishaps, it becomes a necessity. The AC-8 provides the protection you need. Unlike most power strips, providing only surge protection and line filtering, the AC-8 is loaded with all of the following features:
Two outlets which sense the current draw of two different pieces of equipment. This allows a single AC-8 to accommodate two different systems, such as an audio and a video system;
External Link allows each channel of the AC-8 to be triggered by a dc voltage. When a channel is active on the AC-8, the External Link outputs a 5 vdc signal to trigger other equipment;
Eight outlets which can be individually programmed to switch on when either of the sensed equipment is turned on. You can even program any outlet to remain powered constantly;
Sequential power on and off can be programmed for individual outlets of the AC-8. This feature allows equipment and the power line to stabilize before other equipment is turned on.
Full transient high-voltage spike suppression and line noise filtering for quality power requirements and equipment protection;
Microprocessor controlled for accurate timing and sensing
Lifetime warrantee on surge suppression circuit. If surge suppression circuitry is damage or surge, R.F. Systems will repair it free of charge.
 

AC-8 Electrical Specifications

Input Power: 120 vac, ±20%, 50/60 Hz
Protection: 15 amp. circuit breaker
Internal Power Consumption: 30 watts
Sensed Outlet Power: 450 watts/outlet
Switched Outlet Power: 1000 watts/outlet
Time Delay On: 1 to 30 seconds
Time Delay Off: 3 to 30 seconds
Operating Temperature: 0°c to 50°c
Storage Temperature: -40°c to 80°c
External Trigger Voltage: 2.5 vdc to 15 vdc
Maximum Continuous AC Voltage: 140 volts
Maximum Continuous DC Voltage: 180 volts
Peak Current: 8,000 amps (8/20 us)
Response Time: < 5 nanoseconds
 

AC-8 Mechanical Specifications

Weight: 3 lbs.
Power Cord: 14 AWG, 6 ft. Grounded
Outlets: 3-pronged, grounded, polarized

 

The following files are available for downloading
AC-8 Instruction Manual AC-8 Dimensional Drawing
acrobat
dxf

 

Buy the AC-8
$460.00
Shipping Weight: 10 lbs


   

© 2003 R.F. Systems, Inc.
all rights reserved
This page was last updated on 07/25/04

site comments to webmaster@rfsystems.com